/

WARDKit 5x5 Waterjet Kit

The only build-it-yourself waterjet series

Looking to add a waterjet to your shop? Build it yourself and save. The WARDKit 5x5 is an affordable, compact waterjet cutting system that provides you with same solid construction and engineering as seen in our E-Series models. Build your kit at the WARDJet facility and you’ll receive assistance and comprehensive training from our technicians.

What's Included

What's included with my WARDKit?

  • 30HP Intensifier Pump
  • 400 lbs. Continuous Bulk Feed Hopper
  • Z-Carriage with Abrasive Cutting Head
  • PC-Based Laptop Controller
  • Ikuhlu CNC Controller Software Package
  • 1 seat of WARDCAM Software
  • 1-year parts warranty on non-consumable items
  • Ruby Orifice
  • High Pressure Tubing to Cutting Head
  • Standard Mini Hopper
  • Abrasive Feed Tubing
  • 2200 lbs. of Garnet Abrasive
WARDKit 5x5
$79kAs low as $405 per week
Toggle Imperial or Metric
Spec Detail
Footprint 7.5' x 9'
One Carriage X-Y Cutting Area 5' x 5'
Two Carriage X-Y Cutting Area 5' x 5'
Software Ikuhlu, WARDCAM, IGEMS
Power Requirements 230V, 30amps, 3 Phase
Air Requirements 80 psi, 2 cfm
Max Number of Z-Carriages 2
Bulk Feed Hopper 400 lb Infini Hopper
Drive Mechanism Ball screw driven in all axes
Linear Positional Accuracy ± 0.003" per axis
Repeatability ± 0.001" per axis
Speed 0.01 in/min - 500 in/min based on 230 volts

See it in Action

Additional Information

Save on taxes with Section 179

Save on your TaxesDeduct up to $500k with Section 179

Learn More

Waterjets Made In USA

Made in AmericaManufactured in the USA

Learn More

What can waterjets cut?
Wood, Stone, Composites, Sheet Metal, Foam, Food, Glass and much, much more...
How do we keep our prices down?
This has been achieved by pioneering an innovative business model specifically aimed at helping our customers. Simply put, we cut out all of the middlemen and high cost centers that do not directly contribute to the building of a great waterjet system.
Why the extra foot of travel?
Often, when adding a second cutting head, the distance the first cutting head can move is reduced to make space for the additional head. We added the extra foot of travel to "park" the second head when not in use. This allows you to have full range of the first cutting head when the second is not in use.
Why the independent carriages?
The benefit of having separate cutting heads on completely independent Z-Carriages is the freedom the operator gets to place the heads as close or as far apart as desired within seconds. Each Z-Carriage has its own motor driven height adjustment, and can be configured to have an independent height sensor.
How thick can waterjet cut?
Waterjet can cut 10" thick stainless steel without too much difficulty, but can cut even thicker material (18" thick Titanium) if the application demands it.

Start Cutting!

Get Solutions. Start tailoring your waterjet today!

Call us at 1.330.677.9100 or Schedule a Live Test Cut

That's right - Watch remotely as your part is being cut! Get A Test Cut