Made in the USA | Call: 
ZX-3043-5 with SafeWalls»
Z-3043
Go Big or Go HomeA new addition to the WARDJet Z-Series line of ultra versatile waterjet cutting systems is the Z-3043. The Z-3043 was named for its cutting envelope of 3 meters by 4.3 meters, which equates to roughly 10 feet by 14 feet. This allows waterjet operators the ability to load three 4x10 sheets or two 6x10 sheets on the Z-3043 at once to increase productivity. The Z-3043 can also grow with your business and options like 5-axis cutting heads, multiple cutting heads, drills, taps, height sensors, etc. can be added on as your waterjet business expands. Take your waterjet cutting to the next level by adding a Z-3043 to your shop floor!
Toggle Imperial or Metric
| Spec | Detail |
|---|---|
| Footprint | 13' x 18.7' |
| One Carriage X-Y Cutting Area | 10.1' x 13.1' |
| Two Carriage X-Y Cutting Area | 10.1' x 14.1' |
| Software | Ikuhlu, WARDCAM, IGEMS |
| Power Requirements (Gantry Only) | 230V, 30 amps, 3 Phase |
| Air Requirements | 80 psi, 2 cfm |
| Max Number of Z-Carriages | 7 |
| Bulk Feed Hopper | 1100 lb pressurized |
| Drive Mechanism | Ball screw driven in all axes |
| Linear Positional Accuracy | ± 0.003" per axis |
| Repeatability | ± 0.001" per axis |
| Speed | 0.01 in/min - 500 in/min based on 230 volts |
See it in Action
ZXL-3043-5 with Shuttle Tables
Z-3043 Ideal Waterjet for Standard Sized Sheets
WARDJet Waterjet Tank Design and Construction
Also to Consider
Controllers
Software
Grates
Pumps
Accessories
Additional Information
Save on your TaxesDeduct up to $1M with Section 179
Made in AmericaManufactured in the USA
What can waterjets cut?
Wood, Stone, Composites, Sheet Metal, Foam, Food, Glass and much, much more...
How do we keep our prices down?
This has been achieved by pioneering an innovative business model specifically aimed at helping our customers. Simply put, we cut out all of the middlemen and high cost centers that do not directly contribute to the building of a great waterjet system.
Why the extra foot of travel?
Often, when adding a second cutting head, the distance the first cutting head can move is reduced to make space for the additional head. We added the extra foot of travel to "park" the second head when not in use. This allows you to have full range of the first cutting head when the second is not in use.
Why the independent carriages?
The benefit of having separate cutting heads on completely independent Z-Carriages is the freedom the operator gets to place the heads as close or as far apart as desired within seconds. Each Z-Carriage has its own motor driven height adjustment, and can be configured to have an independent height sensor.
How thick can waterjet cut?
Waterjet can cut 10" thick stainless steel without too much difficulty, but can cut even thicker material (18" thick Titanium) if the application demands it.